Instruction/ maintenance manual of the product TLE 1116 W Zanussi
Go to page of 28
INSTRUCTIONS MANUAL W ASHING MACHINE TLE 1116 W 146 4959 01 - 0 7 /0 6.
2 Contents For the User Important Safety Information 3 Your New Washing Machine 4 Description of the Appliance 5 Detergent Dispenser 5 The Control Panel 6-8 Operating Sequence 9-11 Before use 9 Load t.
3 Impo rtant Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner.
4 Y our Ne w W ashing Machine Y our new w ashing machine meets all moder n requirements f or eff ectiv e treatment of laundr y with low w ater , energy and detergent consumption.
5 Description of the Appliance Detergent Dispenser 1 Detergent compartment for pre-wash . 2 Detergent compartment for main wash . 3 Fabric softener . 4 Softener overflow Lid Handle for opening lid Tra.
6 The Control Panel 1 ON/OFF button Press this button to switch the washing machine on. Press the ON/OFF button again to switch the machine off. 2 MAINS-ON light This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.
7 RINSE HOLD position: when you choose this option, the machine will not drain the water of the last rinse which could crease the laundry . At the end of the cycle, the light "END" will light to indicate that the water must be drained.
8 To select RINSE and SPIN , press the SKIP button once, the W ASH LED goes out. T o select SPIN onl y , press the SKIP button twice. The W ASH and RINSE LED's go out. T o select DRAIN , press the SKIP button three times, the W ASH - RINSE - SPIN LED's go out.
9 Operating Sequence Before use Before using your appliance for the first time, we recommend you to run a 90°C cotton cycle without any laundry, to remove any manufacture residue from the drum and tub: - Pour 1/2 a measure of detergent into the "detergent dispenser" and start the machine.
10 7 Select the spin speed and the RINSE HOLD option Press the SPIN SPEED button repeatedly in order to select the desired spin speed or the RINSE HOLD option. The relevant light will illuminate. If you select the RINSE HOLD option, the machine will stop at the end of the programme with the water still in the tub.
11 13 How to open the lid during the cycle of the programme Y ou can open the lid after you have pressed PA USE, provided the following conditions exist: • the appliance is not in the heating phase, • the level of the water is not high, • the drum is not turning.
12 Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g=1kg Sheet 700.
13 Which detergent? ... To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines.
14 WASHING SYMBOL WASH ACTION FABRIC Normal (Maximum) White Cotton or Linen without Special Finishes Normal (Maximum) Cotton, Linen or Viscose without Special Finishes, Colourfast at 60°C Reduced (Me.
15 Washing Programmes Programmes ( ) This programme at 60°C is the reference programme for the Energy label according to EEC Directive 92/75. (*) The data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundr y , the temperature of the water supply and the ambient temperature .
16 Washing Programmes Special programmes (*) The data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundr y , the temperature of the water supply and the ambient temperature . The data refers to the highest temperature provided for each programme.
17 Before carrying out any maintenance or cleaning you must DISCONNECT the appliance from the electricity supply. Descaling The water we normally use contains lime. To help prevent the formation of lime deposits we recommend you periodically, particularly in hard water areas, use a water softening powder in the machine.
18 To drain the residual water : Place a shallow container beneath the trap door. Turn the filter handle anticlockwise until the filter cap handle is vertical, any residual water will be released (fig.8). To clean the filter : Unscrew the filter anticlockwise and remove (fig.
19 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer .
20 SYMPTOM POSSIBLE C AUSE SOLUTION The machine vibrates or is nois y . The internal packing and/or transit bolts have not been removed. Remove internal packing/transit bolts. The wash load is unevenly distributed. See hints and tips section. The machine is overloaded.
21 In the event of your appliance requiring service, or if you wish to purchase spare pa rts, please con- tact your local Service Force Centre b y telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
22 Guarantee Conditions Standard guarantee conditions We, Zanussi-Electrolux, unde rtake that if within 12 months of the date of the purchase this ZANUSSI-ELECTROLUX appliance or any pa rt thereof is .
23 Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any wa y . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
24 Fig. 1 Fig. 2 Fig 4 Fig 6 Fig 3 Fig 5 Unpacking Packing used to protect internal parts of the washing machine during transport must be removed before the washing machine is used for the first time.
25 Levelling the Appliance • The appliance must be levelled using the adjustable feet. • Adjust the feet so that the appliance is level. The appliance must not rock when weight is applied.
26 W ater Connection This appliance is designed to be permanently plumbed into your home's water supply and drai- nage system. W ater Inlet Please install the water inlet hose onto the back of your washing machine : - Inser t the seal in the hole at the bottom of the back panel (fig.
27 Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed.
© Electrolux plc 2003.
An important point after buying a device Zanussi TLE 1116 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi TLE 1116 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi TLE 1116 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi TLE 1116 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi TLE 1116 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi TLE 1116 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi TLE 1116 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi TLE 1116 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi TLE 1116 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
