Instruction/ maintenance manual of the product BC4350FW Zenoah
Go to page of 4
1. Read this manual carefully until you completely understand and can follow all safety notes, precautions, and operating instructions before using of the unit. 2. Do not operate this tool when you are tired, ill, or under the influence of alchohol, drugs, or medication.
■ ENGINE • Using attached 4 socket screws, secure the connection firmly with equal force. ■ HANDLE 1. Loosen the 4 bolts on the upper cap and insert the handles equally. Retighten the bolts. 2. Put the handle assembly into the bracket and put the upper cap over it.
2. Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine. 3. Open the fuel tank cock. (1) Choke lever (2) Close (3) Open (4) Fuel tank cock (5) Close (6) Open 4.
■ PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE 1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.
An important point after buying a device Zenoah BC4350FW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah BC4350FW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah BC4350FW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah BC4350FW you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah BC4350FW will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah BC4350FW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah BC4350FW.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah BC4350FW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah BC4350FW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
