Instruction/ maintenance manual of the product BC40EB Black & Decker
Go to page of 12
40 AMP SMAR T ™ FULL Y A UT OMA TIC B A TTER Y CHARGER INSTR UCTION MANU AL Thank you for choosing Black & Decker! Go to www .BlackandDecker .com/NewOwner to register your new product Catalog Nu.
1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury .
2 SAFETY GUIDELINES / DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury .
3 and/or severe burns. Be aware of first aid procedures in case of accidental contact with battery acid. • Have plenty of fresh water and soap nearby in case battery acid contacts skin. • If battery acid contacts skin or clothing, wash immediately with soap and water for at least 10 minutes and get medical attention immediately .
4 Follow these steps when the battery is installed in a vehicle. A spark near the batter y may cause an explosion. CAUTION: TO REDUCE RISK OF A SP ARK NEAR THE BA TTERY : 1. Position AC and DC cords away from hood, door , or moving engine parts. 2. Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons.
5 to allow for the maximum proper internal chemical energy transfer . At the end of Stage 2, the charger will automatically move into Stage 3 charge mode. Stage Three — T op-Off Charge voltage is automatically maintained and reduced to a predetermined level while current is adjusted for a safe, effective battery charge.
6 4/10/20/40A AMP (Charge Rate Selector) (Step 2) allows the user to select the charge rate based on battery size. This selection and the actual batter y charge rate are monitored by the microprocessor . The charger will stop charging if the rate is too fast or too slow for the battery size or condition.
7 Charge Rate Selection After charger clamps are correctly connected, plug the charger into a 120 volt AC outlet and the charger will show “000” on the Digital Display , indicating power has been applied. Select the proper charge current rate based on battery size.
8 WARNING: BURST HAZARD: • NEVER EQUALIZE A GEL OR AGM BA TTERY, these may burst and cause SERIOUS INJURY and property damage. • Remove or disconnect the vehicle’ s batter y when equalizing. The frequency which the equalization process needs to be run depends on the use of the battery .
9 Remove or disconnect the vehicle’ s batter y when reconditioning. 1. Make sure the charger is in initiation state with a circulating pattern on the display or in charge OFF mode with “000” on the display . If not, press 4/10/20/40 AMP button repeatedly until “000” shows on the display .
10 F01 — Internal Shorted Cell Battery If the battery being charged has an internal shorted cell, the F01 will show. W e recommend taking your battery to a certified automotive service center for evaluation.
11 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center . If you need assistance regarding accessories, please call: 1-800-544-6986.
An important point after buying a device Black & Decker BC40EB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker BC40EB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker BC40EB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker BC40EB you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker BC40EB will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker BC40EB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker BC40EB.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker BC40EB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker BC40EB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
