Instruction/ maintenance manual of the product BDCMTTS-XE Black & Decker
Go to page of 12
Australia New Zealand BDCMTTS-XE 3-3/8 INCh (86 mm) TRImSAw ATTAChmENT www .blackanddecker .com.au QUICK CONNECT SYSTEM.
2 PARTS AND FEATURES 1. T rim saw attachment 2. Lock-off button 3. Spindle lock 4. Wrench 5. Shoe 6. Upper guard 7. Lower saw blade guard 8. Retracting lever Figure A 1 2 4 3 5 6 7 8.
3 ENGLISH (Original instructions) W ARNING: Read all saf ety war nings and all instructions. F ailure t o follo w the w arnings and instructions ma y result in electric shoc k, re and/or serious injur y . Sav e all war nings and instructions f or fut ure r efer ence .
4 ENGLISH (Original instructions) CAUSES AND OPERATOR PREVENTION OF KICKBACK • Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator.
5 ENGLISH (Original instructions) • Keep your body positioned to either side of the blade, but not in line with the saw blade. KICKBACK could cause the saw to jump backwards (see Causes and Operator Prevention of Kickback and KICKBACK) . • Avoid cutting nails.
6 ENGLISH (Original instructions) WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
Secure the workpiece to a stable platform as shown in Figure D . It is important to support the work properly to minimize body exposure, blade binding, or loss of control. ASSEMBLY/ADJUSTMENT SET-UP W ARNING: To reduce the risk of injury, always remove battery from saw before any of the following adjustment operations.
• Always secure work to prevent workpiece movement during cut. • Do not try to force saw back on line if your cut begins to go off line. This can cause KICKBACK. Stop saw and allow blade to coast down to a stop. Withdraw from cut and start a new cut on the line.
W ARNING: To minimize the risk of eye injury, always use eye protection. Carbide is a hard but brittle material. Foreign objects in the work piece such as wire or nails can cause tips to crack or break. Only operate saw when proper saw blade guard is in place.
BLADE SELECTION Your circular saw is designed for use with 3-3/8 inch (86 mm) diameter blades that have a 15 mm diameter bore. Blades must be rated for 3000 RPM operation (or higher). NOTE: This saw is de signed to cut wood and plastic. Do not use masonry or metal cutting blades.
T echnical data TrimSaw Weight 729g MAINTENANCE Use only mild soa pa ndd amp cloth to clean thetoo l. Never let any liquid ge tin side the tool; neverimmerse any partof thetool into aliquid.
07/2012 Australia & New Zealand Stanley Black & Decker 82 T aryn Drive, Epping, VIC 3076 Australia T el.1800 444 224 (Aust) or T el. 0800 339 258 (NZ) 90589521 REV-0.
An important point after buying a device Black & Decker BDCMTTS-XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker BDCMTTS-XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker BDCMTTS-XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker BDCMTTS-XE you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker BDCMTTS-XE will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker BDCMTTS-XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker BDCMTTS-XE.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker BDCMTTS-XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker BDCMTTS-XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
