Instruction/ maintenance manual of the product 5000 PTZ Bosch Appliances
Go to page of 22
AUTODOME 5000 PTZ Camera en Installation Guide.
.
Table of contents 1 Safety 4 1.1 About this Manual 4 1.2 Conventions in this Manual 4 1.3 Legal Information 4 1.4 Important Safety Instructions 4 2 Description 6 2.1 Unpacking 6 3 Installing a Recessed Mount 7 3.1 Parts List 7 3.2 Installing the Recessed Mount 8 4 Installing a Pipe Mount 10 4.
Safety About this Manual This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. Because of the ongoing development of products, the content of the manual may change without notice.
– Only use accessories that have been recommended by the manufacturer or are delivered with the device. – Fit the device according to the manufacturer's instructions.
Description This manual provides instructions for mounting a AUTODOME 5000 Series PTZ Dome to the VEZ-A5-IC In-ceiling (Recessed) Mount. This mount allows you to recess the AUTODOME 5000 into an indoor drop-ceiling. This manual provides instructions for mounting a AUTODOME 5000 PTZ Dome to the VEZ-A5- PP Pipe Mount.
Installing a Recessed Mount Use this chapter to install the indoor dome camera into an indoor ceiling space. Parts List Quantity Item 1 Ceiling Bracket 1 Rubber Gasket 1 Housing Frame 1 Trim Ring 3 M4x10 Phillips Screws 1 Guide Pattern 1 Installation Manual 3 3.
Installing the Recessed Mount The illustration below shows the required parts for the recessed mount. Refer to the steps that follow for instructions. 1 2 3 4 5 6 1 Ceiling Bracket 4 Housing Frame 2 M4x10 Screws (3 pieces) 5 Dome Camera 3 Rubber Gasket 6 Trim Ring 3.
Recessed Mount Installation Instructions 1. Find a secure location on the ceiling and apply the ceiling guide pattern the ceiling tile or drywall. Use the pattern as a template to cut the proper circle in the ceiling.
Installing a Pipe Mount Use this chapter to install and indoor or outdoor dome camera to a pipe. Parts List Quantity Item 1 Pipe Mount Base with Safety Tether 1 300 mm (11.81 in.) Pipe Extension 1 200 mm (7.87 in.) Pipe Extension 1 M38 to M38 Connection Ring 1 M38 to M33 Connection Ring 1 3/4 x 260 in.
Installing the Pipe Mount The illustration below shows the required parts for the pipe mount. Refer to the steps that follow for instructions. 1 2 3 4 6 5 9 8 7 1 Pipe Mount Base 6 M38 to M33 Pipe Connector 2 M10x25L Phillips Screws (4 pieces) 7 Safety Tether 3 Pipe Extension, 300 mm (11.
Pipe Mount Installation Instructions ! Caution! Strength of Mounting Surface The fasteners and mounting surface must be capable of supporting a maximum load of 12 kg (26.4 pounds). 1. Locate a secure position to secure the Pipe Mount Base (1). Ensure there is an adequate opening in the ceiling or mounting structure for the wires to pass through.
14. Place the top of the Dome Camera (9) inside the Adaptor (8) and turn clockwise until the Dome Camera latches to the Adaptor. 15. Fasten the M5x8L screw using the T20 Security Torx wrench (shipped with the camera) to secure the Dome Camera to the Adaptor.
Installing a Wall Mount Use this chapter to install and indoor or outdoor dome camera to a wall. Parts List Quantity Item 1 Wall Mount with Safety Tether 1 3/4 x 260 in. Roll Teflon Tape 1 5g Container Silicon Grease 4 M10x25L Phillips Screws 1 Rubber Gasket 1 Installation Manual 5 5.
Installing the Wall Mount The illustration below shows the required parts for the wall mount. Refer to the steps that follow for instructions. 1 Wall Mount Base 4 Safety Tether 2 Washers (4 pieces) 5 Adaptor 3 M10x25L Phillips Screws (4 pieces) 6 Dome Camera 5.
Wall Mount Installation Instructions ! Caution! Strength of Mounting Surface The fasteners and mounting surface must be capable of supporting a maximum load of 12 kg (26.4 pounds). 1. Locate a secure position to secure the Wall Mount Base (1). Ensure there is an adequate opening in the wall for the wires to pass through.
Replacing the Bubble This section provides instructions for replacing a bubble on an AUTODOME 5000 camera. Parts List Quantity Item 1 Tinted Bubble with Trim Ring (with two (2) M3x23L Torx screws attached) 1 Torx Wrench 1 Installation Manual 6 6.1 AUTODOME 5000 PTZ Camera Replacing the Bubble | en 17 Bosch Security Systems, Inc.
Installing the Replacement Bubble Use the illustration below as a guide for replacing the bubble. 1 2 3 1 Safety Tab with M3x5 Screw 2 Bubble Assembly 3 M3x23L Screw (2 pieces) 6.2 18 en | Replacing the Bubble AUTODOME 5000 PTZ Camera 2013.07 | 1.3 | Installation Guide Bosch Security Systems, Inc.
Bubble Replacement Instructions 1. Loosen the two M3x23L screws (3) from the bubble on the camera. 2. Detach the Bubble Assembly (2) from the camera. 3. Remove the screw that secures the Safety Tether to the Bubble. Keep the screw to secure the bubble replacement.
Technical data Camera Dimensions 295.5 (11.63) 218.38 (8.6) 81.9 (3.22) mm (in.) 208 (8.19) 187 (7.36) Figure 7.1: AUTODOME 5000 Indoor/Outdoor Dimensions 1 Diameter without sunshield (indoor models) 2 Diameter with sunshield (outdoor models) 7 20 en | Technical data AUTODOME 5000 PTZ Camera 2013.
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA, 17601 USA www.boschsecurity.com © Bosch Security Systems, Inc., 2013.
An important point after buying a device Bosch Appliances 5000 PTZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances 5000 PTZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances 5000 PTZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances 5000 PTZ you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances 5000 PTZ will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances 5000 PTZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances 5000 PTZ.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances 5000 PTZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances 5000 PTZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
