Instruction/ maintenance manual of the product Paint Sensation Spin Master
Go to page of 6
• Design COOL ART and CRAFTS with Paint Sensation ™ ! • Paint on whatever you can fit into the Spinning T ray! Please remove everything from the packaging and compare to the contents shown on this page. If any items are missiont, please call Spin Master ’ s customer care hotline: 1-800-622-8339.
ASSEMBL Y Paint Canister Orange Gear Axle Push Down Paint Arm Key Hole Slot Arm Cover A. Raise the Paint arm to an upright position. 1 B. Push down until the Arm Cover clicks into position. A. Remove lid. Fill Paint Canister 3/4 full. 2 Note: The orange gear in the centre of the canister must face the axle.
ASSEMBL Y (CONTINUED) Bottom Paint T ray Cover the Paint Canister with the Clear Dome, turning it clockwise, until it locks into place. 3 Pull the Control Arm out and position the Bottom Paint T ray into the slot in the centre of the control arm, as shown.
CREA TING “ON/OFF” Switch 1 Pressing or Pulsing the Paint Button controls how fast paint comes out of the Paint Canister . T ry experimenting with each of the 3 controls.
Half Circle Paint Hole CLEANING 1 • Remove the Arm Cover , T rays, Clear Dome and Paint Canisters from Paint Sensation ™ . • Rinse or soak each one with warm water and soap. • Hold the Arm Cover upside down under warm running water . • Rinse until all parts are clean.
1. Use a phillips screwdriver (not provided) to loosen the battery compartment door hold down screws. Remove the battery compartment door . 2. Install four 1.5-V olt “C” alkaline batteries (not included). Be careful to align the positive (+) and (-) polarities with the corresponding markings inside the battery compartment.
An important point after buying a device Spin Master Paint Sensation (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spin Master Paint Sensation yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spin Master Paint Sensation - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spin Master Paint Sensation you will learn all the available features of the product, as well as information on its operation. The information that you get Spin Master Paint Sensation will certainly help you make a decision on the purchase.
If you already are a holder of Spin Master Paint Sensation, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spin Master Paint Sensation.
However, one of the most important roles played by the user manual is to help in solving problems with Spin Master Paint Sensation. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spin Master Paint Sensation along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
