Instruction/ maintenance manual of the product BF33STP/DXP Dimplex
Go to page of 15
PRACTICAL USER’S GUIDE FOR THE ELECTRIC FIREPLACE MODEL NUMBERS: BF33STP/DXP BF39STP/DXP Valued Customer, We are pleased that you have chosen to purchase an electric fireplace manufactured by Dimplex North America Ltd. Over the years, valuable memories will occur around the warmth and comfort of your hearth.
QUICK REFERENCE GUIDE FOR THE ELECTRIC FIREPLACE 1. Prior to the first use of the fireplace verify the following: • Are the circuit breakers for the fireplace on? • Are the light bulbs in your fire place loose? (to check, follow the instructions for replacing the li ght bulbs under the maintenance section of this manual) 2.
CONTENTS P AGE 1 Import ant Instructions P AGE 2 Model and Serial Number Information P AGE 3 Bathroom Inst allation P AGE 4 Operation P AGE 5 Maintenance P AGE 9 Accessories P AGE 10 W arranty.
IMPORTANT INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances , basic precautions should always be followed to reduce the risk of fire, electric s hock, and injury to persons , including the following: 1.
Model Numbe r Serial Number IMPORTANT INSTRUCTIONS If you have any questions about our products pl ease have the product model and serial numbers available upon call ing Dimplex customer service. To locate the model and serial number labels see below.
Bathroom Installation This firebox must be protected by a GFI receptacle or circuit. If recep tacle is used it must be read ily accessible. To prevent electrical shock this unit is an e lectrical a ppliance that is not water tigh t and must be installed as to prevent water from entering the unit.
HEATER CONTROL SWITCH OPERATION The controls for the Electric Fireplace are loca ted at the bottom right han d corner of the unit. MANUAL CONTROLS A. Main Power Switch Main on/off switch, activates the flame effect B. Heater Control Switch Heater ON/OFF switch, activates the heater C.
the room temperature at this setting. For additional hea t, turn the thermostat clockwise until you hear the click again and the heater will turn on. To turn the heater off, turn the thermostat counter clockwise al l the way, and/or turn the manual heater switch on the unit to the OFF position.
replace light bulbs. Long life bulbs are recommended to reduce the frequency of bulb changes. To access the light bulb area (BF33STP, BF39STP models) 1. Open steel curtain (remove glass doors if applicable). 2. Remove two screws on log bracket and set aside.
To access the light bulb area (BF33DXP, BF39DXP models) 1. Open steel curtain (remove glass doors if applicable). 2. Remove two screws on log bracket and set aside. (FIGURE 3) 3. Pull front edge of plastic ember bed or plastic grate up and forward until rear tab releases from the ledge located at the bottom of the mirror.
PURIFIRE™ FILTER The Purifire™ filter supplied in your fireplace is reusable and washable. The filter should be cleaned or replaced on average once a year, or if overheat indicator lamp is activated. To clean the filter gently tap f ilter on a hard surface to dislodge any loose dirt or debris, and then clean with water.
Mirror Cleaning The mirror is cleaned in the factory during the Assembly operation. During shipment, installation, Handling, etc., the mirror surface may collect dust Particles; these can be removed by buffing lightly With a clean dry cloth.
TWO YEAR LIMITED WARRANTY Products to which this limited warranty applies This limited warranty applies to the following models of your ne wly purchased Dimplex electric fireplace BF33STP, BF33DXP, BF39STP, BF39DXP and to newly purchased D im ple x fireplace surrounds (mantels) and trims.
What you must do to get serv ice under this limited warranty Defects must be brought to the at tention of Dimplex Technical Se rvice by contacting Dim plex at 1-888- DIMPLEX (1-888-346-7539), or 1367 Industria l Road, Cambridge Ontario, Canada N1R 7G8.
What Dimplex and its dealers and service agents are also not responsible for: IN NO EVENT WILL DIMPLEX , OR ITS DI RE CTORS, OFFICER S, OR AGENTS, BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHE.
An important point after buying a device Dimplex BF33STP/DXP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex BF33STP/DXP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex BF33STP/DXP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex BF33STP/DXP you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex BF33STP/DXP will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex BF33STP/DXP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex BF33STP/DXP.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex BF33STP/DXP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex BF33STP/DXP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
