Instruction/ maintenance manual of the product HORIZONTE EDS3 Elica
Go to page of 10
EN Instruction on mounting and use.
.
.
.
.
EN - Instruction on mounting and use Consult the designs in the front pages referenced in t he text by alphabet letters. Closely follow the instructions set out in thi s manual. All responsibility, for any eventual inconveniences, damages o r fires caused by not complying with the instruct ions in this manual, is declined.
17 Electrical connection The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an acce ssible area.
11. Apply the flues support bracket G to the wall adherent to the ceiling, use the flues support bracket as a perforation diagram (if present, the sma ll slot on the support must coincide with the line drawn previously on the wall) and mark two holes with a pencil.
Maintenance ATTENTION! Before performing any maintenance operation, isolate the hood from the electr ical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from t he socket.
L I 3BF C Ed . 03 / 09.
An important point after buying a device Elica HORIZONTE EDS3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Elica HORIZONTE EDS3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Elica HORIZONTE EDS3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Elica HORIZONTE EDS3 you will learn all the available features of the product, as well as information on its operation. The information that you get Elica HORIZONTE EDS3 will certainly help you make a decision on the purchase.
If you already are a holder of Elica HORIZONTE EDS3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Elica HORIZONTE EDS3.
However, one of the most important roles played by the user manual is to help in solving problems with Elica HORIZONTE EDS3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Elica HORIZONTE EDS3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
