

350 East Plumeria Drive San Jose, CA 95134 USA
February 2014 202-11356-01

Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR.
Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Support · Compliance · Trademarks


The 3G USB modem allows you to connect your computer to the Internet using a high-speed 3G network.
This chapter includes the following sections:


Table 1. LED descriptions
Before you begin using your 3G USB modem, insert a SIM or USIM card into the 3G USB modem and set up the 3G USB modem using the setup wizard. If you want to save data on the 3G USB modem, you can also inset a microSD card into the 3G USB modem.
Before you begin using your 3G USB modem, you must insert a SIM or USIM card into the 3G USB modem.
Indicator LED · Getting Started

To insert a SIM or USIM card into the 3G USB modem:
If you want to save data on your 3G USB modem, you can insert a microSD into the 3G USB modem. The 3G USB modem supports a MicroSD card storage of up to 32 GB.
To insert a microSD card into the 3G USB modem:
The microSD card’s drive appears on your computer.
Getting Started

To set up the 3G USB modem using a Windows computer, install NETGEAR® AirCard® Mobile Broadband genie® on your computer using the Setup Wizard that is already installed in the 3G USB modem.
The 3G USB modem is also compatible with MAC computers. For more information, see Set Up the 3G USB Modem Using a MAC Computer on page 11.
To install Mobile Broadband genie on a Windows computer:
The setup wizard displays.
modem and double-click AutoRun.exe.

Getting Started

The License Agreement screen displays:

The Select Destination Location screen displays:

Getting Started

The Add Shortcut screen displays:

The Setup Complete screen displays:

The Mobile Broadband genie shortcut desktop icon displays on your desktop and an icon also displays in the Windows desktop tray.
Getting Started

available, and the icon is not displayed. When you insert the 3G USB modem again, the icon returns.
To launch Mobile Broadband genie on a Windows computer after installation:
To set up the Mobile Broadband genie using a MAC computer, install the Mobile Broadband genie on your computer using the Setup Wizard that is already installed in the 3G USB modem.
The 3G USB modem is also compatible with Windows computers. For more information, see Set Up the 3G USB Modem Using a Windows Computer on page 8.
To install Mobile Broadband genie on a MAC computer:
The setup wizard displays.
under Devices and double-click NETGEAR AirCard Mobile Broadband genie for AC327U.

Getting Started



Getting Started



Mobile Broadband genie installs.
Getting Started


Your computer restarts and the Mobile Broadband genie is installed.
To launch Mobile Broadband genie on a MAC computer after installation:
If you do not see shortcut desktop icon on your desktop, go to Applications and double-click NETGEAR AirCard Mobile Broadband genie for AC327U.
Getting Started

To connect your computer to the Internet, you need to set up your ISP’s APN and network settings.
This chapter includes the following sections:

Use the Mobile Broadband genie to set up your Internet service provider’s (ISP) APN profile and connect your computer to the Internet. You can let the 3G USB modem automatically determine your ISP’s APN profile or you can set it up manually.
You must set the correct access point name (APN) before connecting to the Internet. If you don't know the APN, contact your ISP.
To automatically set up your ISP’s APN and connect to the Internet:

updates every time a user connects to the Internet.
The 3G USB modem automatically determine what your ISP’s APN profile is and connects your computer to the Internet.
Connecting to the Internet

To manually set up your ISP’s APN profile and connect to the Internet:
Your computer connects to the Internet.
a. Click the Add APN button.
Connecting to the Internet


b. Click the New button.
c. Type your ISP’s name in the Profile Name field.
d. Select the Dynamic or Static radio button.
e. If you select the Static radio button, compete the APN field.
f. Complete the fields in the Authentication section.
g. Click the Save button.
h. To set this profile as your default profile, click the Set as Default button.
i. Click the Internet Connection button.
The connect screen displays.
j. Select the profile you created from the Profile name drop-down list.
k. Click the Connect button.
Your computer connects to the Internet.
If you want to disconnect the 3G USB modem from the Internet or change your ISP profile settings, you need to disconnect the 3G USB modem from the ISP that it is currently connected to.
To disconnect from an ISP:
Connecting to the Internet


The 3G USB modem disconnects from the ISP and the computer disconnects from the Internet.
You can connect to a 3G or 2G network and register a network operator.
recommends that you do not change the default network type.
To connect to a network type:
The settings screen displays.
The network screen displays.
Connecting to the Internet


detect a SIM or USIM card or the 3G USB modem is already connected to a network. To change the network settings, you need to disconnect the 3G USB modem from the ISP connection. For more information, see Disconnect from an ISP on page 18.
Your changes are saved.
To automatically search for a network operator and register it:
The settings screen displays.
The network screen displays.
Connecting to the Internet


The network is registered.
To manually search for a network operator and register it:
The settings screen displays.
The network screen displays.
Connecting to the Internet

The network is registered.
Connecting to the Internet

This chapter includes the following sections:

A personal identification number (PIN) code protects your SIM or USIM card from
unauthorized use. Your SIM or USIM card manufacturer provides a PIN code and PIN unblocking key (PUK).
You can require PIN code verification every time Mobile Broadband genie is launched.
After the PIN code verification is enabled, you must enter the correct PIN code after you open
Mobile Broadband genie to use the network-related functions.
To enable a PIN code verification:
The settings screen displays.

The PIN code verification is enabled.

or USIM card is locked and the Unlock PIN screen displays. For more information, see Unlock a PIN Code Verification on page 27.
To modify a PIN code verification:
The settings screen displays.

The PIN can be a numeric string of four to eight characters.
Your changes are saved.

To disable a PIN code verification:
The settings screen displays.

The PIN code verification is disabled.
To launch Mobile Broadband genie if the PIN code verification is enabled.
The Verify PIN screen displays.

You can now use the 3G USB modem.
locked and you cannot use it until you enter the PUK code. For information about how to unlock your SIM or USIM card, see Unlock a PIN Code Verification on page 27.
If you enter the wrong PIN codes three times, the SIM/USIM card is locked and you cannot use it until you enter the PUK code. Contact your ISP for the PUK code.
If the SIM or USIM card is locked, the Unlock PIN screen displays:

To unlock a PIN code verification:
The PIN can be a numeric string of four to eight characters.
The PIN code is unlocked.
If you enter the wrong PUK code 10 times, the SIM/USIM card is locked permanently and you are no longer able to use the SIM or USIM card. To get a new SIM or USIM card, contact your ISP for assistance.
a. Click the Settings icon.
b. Select PIN Management > Unlock PIN.
The unlock PIN screen displays.
c. Type the current PUK in the Current PUK field.

d. Type the new PIN in the New PIN and Confirm New PIN fields.
The PIN can be a numeric string of four to eight characters.
e. Click the OK button.
The PIN code is unlocked.
If you enter the wrong PUK code 10 times, the SIM/USIM card is locked permanently and you are no longer able to use the SIM or USIM card. To get a new SIM or USIM card, contact your ISP for assistance.
USSD refers to the Unstructured Supplementary Service Data protocol, which is used to communicate with your ISP’s server to get information about your service. If you do not know the USSD service code, contact your ISP.
In order to send a USSD service code to your ISP’s server, you need to add a USSD service code to the 3G USB modem.
To add a USSD service code:



If you do not know the code, contact your ISP.
The USSD service code is added.
You can send a USSD code to your ISP’s server.
To send a USSD service code:
The USSD screen displays.
The USSD code is sent to the ISP’s server.

To edit a USSD service code:
The USSD screen displays.
Your changes are saved
To delete a USSD service code:
The USSD screen displays.
You are asked to confirm the delete command.
The USSD service code is removed.
You can manage a phone book saved on your computer’s local hard drive and SIM or USIM card using the Mobile Broadband genie.

To add a contact to your phone book:
The phone book screen displays.

The contact is added to your phone book.
To edit a contact to your phone book:
The phone book screen displays.

Your changes are saved.
To search for a contact in your phone book:
The phone book screen displays.
A search field displays.
The related contacts display.
To import a contact from your computer to your phone book:
The phone book screen displays.


The contact is imported into your phone book.
To export a contact from your phone book to your computer:
The phone book screen displays.

The Export screen displays.
The contact is exported.
To copy a contact:
The phone book screen displays.


The contact is copied to your local hard drive.
The contact is copied to your SIM or USIM card.
To delete a contact in your phone book:
The phone book screen displays.
You are asked to confirm the delete command.
You can create groups for your contacts to easily manage your phone book.

To create a group in your phone book:
The phone book screen displays.
An entry for your new group displays.
To create a group in your phone book:
The phone book screen displays.
The group is renamed.
To delete a group in your phone book:
The phone book screen displays.

You are prompted to confirm the delete command.
The Short Message Service (SMS) screen allows you to manage your text messages.
To view your text messages:

To create a text message:



, and click the OK button.

The phone number is added to your text message.
You can add up to 100 phone numbers.
The message can be up to 2048 characters.
You can return to a saved text message and edit your message.
To edit a saved text message:
The SMS screen displays.

To reply or forward a text message:
The SMS screen displays.
To delete a text message:
The SMS screen displays.
You are asked to confirm the delete command.
The message moves to the trash.
You are asked to confirm the delete command.

The messages are deleted.
You can enable your 3G USB modem to display a new text message icon on the status bar at the bottom of the screen or set your computer to play a sound when a new text message arrives.
To display a notification when a text message arrives:
The settings screen displays.

A text message icon
displays on status bar when a new message arrives.

To play a sound when a new text message arrives:
The settings screen displays.
A sound is played every time you receive a new message.
You can specify saving your text messages on your computer’s hard drive or SIM or USIM card.
To save a text message on your hard drive or SIM or USIM card:

The settings screen displays.
Your changed are saved.
You can request to receive delivery reports after you send text messages using the 3G USB modem.
To request delivery reports:
The settings screen displays.

You will receive delivery reports as text messages after you send a message.
The 3G USB modem automatically saves your ISP’s message center’s phone number, but your can change the phone number.
To set the message center’s phone number:
The settings screen displays.

Your changes are saved.
You can make or answer phone calls using Mobile Broadband genie.
To make a phone call using the Mobile Broadband genie:


The call is made.
To answer a phone call using the Mobile Broadband genie:

The call is answered.
The call ends.
You can view calls you have received, missed, or dialed.
To view phone calls:
The call screen displays.

To delete saved phone calls:
The call screen displays.
and click the Clear button

This chapter includes the following sections:

You can view the 3G USB modem’s connection details in the Mobile Broadband genie status bar.
To view the connection details:

Operator Network connection status Text Message icon
You can view the following connection details:
To return to the home screen, click the Back button at the top of the screen.
Network signal · Network type · Managing and Maintenance

The Mobile Broadband genie allows you to set the following display settings:
To launch Mobile Broadband genie after you start up your Windows computer:
The settings screen displays.

Mobile Broadband genie launches after you start up your Windows computer.
To minimize the desktop tray icon when you start up Mobile Broadband genie:
Managing and Maintenance

The settings screen displays.
The Mobile Broadband genie minimizes.
To launch the Mobile Broadband genie from your Windows desktop tray:
A pop-up menu displays.

You can change the location where your 3G USB modem’s data is stored on your computer.
Managing and Maintenance

To change the location where data is stored on your computer’s hard drive:
The settings screen displays.
Your changes are saved.
You can view network traffic information using Mobile Broadband genie. The statistical data of the traffic is only for your reference.
To view network traffic information:
The settings screen displays.
Managing and Maintenance


You can view diagnostic information for the following:
To view device diagnostics:
The diagnostics screen displays.
Managing and Maintenance

The device diagnostics display:

To view SIM or USIM card diagnostics:
The diagnostics screen displays.
Managing and Maintenance

The SIM or USIM card diagnostics display:

To view the network status:
The settings screen displays.
The diagnostics screen displays.
Managing and Maintenance

The network status displays:

To view network settings:
The diagnostics screen displays.
Managing and Maintenance

The network settings displays:

You can uninstall Mobile Broadband genie on a Windows and MAC computers.
To uninstall Mobile Broadband genie on a Windows computer:
Select Start > All programs > NETGEAR AirCard Mobile Broadband genie > NETGEAR AirCard Mobile Broadband genie for AC327U Uninstall.
To uninstall Mobile Broadband genie on a MAC computer:
Go to Applications and select NETGEAR AirCard Mobile Broadband genie Uninstaller.
Managing and Maintenance

This chapter covers the following topics:

What should I do if I cannot access the Internet?
Try these troubleshooting tips:
Why is only part of the pasted content displayed when I create a text message?
When you create a text message, you can enter a maximum of 2048 English characters. If the number of characters of the pasted information exceeds the limit, the number of characters that are in excess are deleted automatically.
Why doesn’t a notification display when a message is received?
The message notification is not set. For more information, see Manage Text Messages on page 37.
Frequently Asked Questions

A. Technical Specifications
This appendix covers the following technical specifications for the 3G USB modem:

Table 2. Platform and chipset
Baseband chipset Qualcomm MSM6290
NAND+SDRAM 512 NAND Flash+256 Mb SDRAM
Table 3. Hardware specifications
Operating frequency • HSPA/UMTS 2100 MHz:
1920 MHz–1980 MHz (uplink) 2100 MHz–2170 MHz (downlink)
880 MHz–915 MHz (uplink) 925 MHz–960 MHz (downlink)
1710 MHz–1785 MHz (uplink) 1850 MHz–1880 MHz (downlink)
Network supported HSPA/UMTS 2100 (900 optional) GSM/GPRS 900/1800 MHz
Rx diversity HSPA/UMTS 2100
Power class UMTS/HSPA 2100 MHz/900 MHz: +24 dBm +1/-3 dB (power class 3) GSM/GPRS 900 MHz: +33 dBm +/-2 dB (power class 4) GSM/GPRS 1800MHz: +30 dBm +/-2 dB (power class 1)
Maximum power consumption
Antenna Built-in monopole antenna
Item Description · Item Description · Technical Specifications

Table 4. Software specifications
Data service HSPA: 7.2 Mbps HSPA/5.76 Mbps HSUPA UMTS: DL/UL 384 Kbps GPRS: DL 85.6 Kbps/UL 42.8 Kbps
Software installation Auto-installation of NETGEAR AirCard Mobile Broadband genie and
Table 5. Interface specifications
USB USB 2.0 high speed
Antenna Built-in UMTS main antenna Built-in UMTS diversity antenna
SIM/USIM card slot Standard SIM card interface, in line with the 3GPP31.101 and 31.102
Power supply +5V power supply through USB interface
AT interface Support 3GPP TS27.005/3GPP TS27.007
Table 6. Physical features
Dimensions 83.4 x 25.4 x 12 mm (3.3 x 1 x 0.5 in.)
Weight 22 g (0.8 lb)

Table 7. Operation environmental requirements
Table 8. Approvals and certifications
Microsoft WHQL certified drivers Certified
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.