


Unpack the Box and Verify the Contents
The NETGEAR® 16-port Gigabit Switch Model GS116 provides you with a low-cost, reliable, high-performance switch to connect up to sixteen different Ethernet-enabled devices (such as computers, file servers and routers) at blazing Gigabit Ethernet speeds.


GS116 16-port 10/100/1000 Mbps Gigabit Switch
GS116 16-port 10/100/1000 Mbps Gigabit Switch
The 16-port Gigabit Switch Model GS116 enables you to build a small network that gives you 10, 100, or 1000 Mbps access to other devices on the network. It provides a full, dedicated 1000 (or 100, or 10 Mbps) connection between two devices. If a device has full-duplex capability, the GS116 switch provides a 2000 Mbps (or 200, or 20 Mbps) connection. This means the GS116 can instantly move even very large files across your network. As an added benefit, this switch works with both Windows and Macintosh computers.
Installation guide, Warranty/Support informaton card
When you open the box, verify that you received everything. The package includes:
Ethernet cables come as either straight-through or crossover cables—depending on whether you’re connecting to a device (computer, server, or printer) or networking equipment (hub, switch, or router). With the Auto Uplink™feature, you don’t have to worry about which one you use. Each port on the GS116 switch automatically configures itself correctly when you plug in a device’s cable.
If you don’t have everything listed above, see the support information card for contact information. If you’re missing the support information card itself, get contact information at www.NETGEAR.com in the Technical Support section.
Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall.
Wall-mount hardware · Power adapter

Make sure the selected location is:
Power 10 Mbps 100 Mbps

10/100/1000 Mbps Gigabit Switch GS116
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16
GS116 16-port 10/100/1000 Mbps Gigabit Switch
Also, you’ll need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters).
The corresponding Link LED for each connected and powered device should light when connected and flash when activity occurs. If the connection is 10 Mbps or 100 Mbps, one of the LEDs in the RJ-45 jack will light up. If the connection is 1000 Mbps, the both of the LED's in the RJ-45 jack will light up.

The Power light is not lit The switch has no power.

Apple G4 PC with GA311 adapter
The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem.
10/100/1000 Mbps Gigabit Switch GS116
12VDC 1.2A 8 7 6 5 4 3 2 1
OFF ON
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16
GS116 16-port 10/100/1000 Mbps Gigabit Switch Model FVS318 Cable/DSL ProSafe VPN Firewall
The Power light should light up.

Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Standards Compatibility: IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control, IEEE 802.1p and TOS priority, WWR scheduling, four queues Network Interface: RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface Power: 25 W max and 5 V @ 5A DC input Physical Dimensions: W: 285 mm (11.22 in) x D: 103 mm (4.06 in) x H: 27 mm (1.06 in) Weight: 0.9 kg (2 lbs) Operating Temperature: 0 to 40° C (32 to 104° F) Operating Humidity: 10% t0 90% relative humidity, non-condensing Electromagnetic Compliance: CE mark, Commercial FCC Part 15, Class A EN 55 022 (CISPR 22), C-Tick Safety Agency Approvals for CE mark, Commercial UL listed (UL 1950), C-Tick the Power Adapter:
Certificate of the Manufacturer/Importer It is hereby certified that the NETGEAR Model GS116 Gigabit Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations.
Frame Filter Rate: 14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port/1,488,000 frames/sec for 1000M port Frame Forward Rate: 14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port / 1,488,000 frames/sec max for 1000M port Network Latency: 100 Mbps to 100 Mbps: 40 µs max (using 64-byte packets) 1000 Mbps to 1000 Mbps: 10 µs max Address Database Size: 8000 MAC addresses Addressing: 48-bit MAC address Queue Buffer: 512 kilobytes per port
EN 55 022 Declaration of Conformance This is to certify that the NETGEAR Model GS116 Gigabit Ethernet Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class A (CISPR 22).
Canadian Department of Communications Radio Interference Regulations This digital apparatus (NETGEAR Model GS116 Gigabit Ethernet Switch) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des Communications Cet appareil numérique (NETGEAR Model GS116 Gigabit Ethernet Switch) respecte les limites de bruits radioélectriques visant les appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada.

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades.
©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, ProSafe, Auto Uplink and Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.
2 0 1 - 1 0 1 1 5 - 0 1
March 2004 *201-10115-01*
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.